AutoCAD Chamfer Command
The chamfer is one of the commands which make our work easy in AutoCAD software. A Chamfer may be a command through which you’ll perform two adjacent sides of any 2d shape at any distance or any particular angle by entering specific values.
The chamfer is used to “ease” otherwise sharp edges, both for safety and to stop damage to the sides. A “chamfer” may sometimes be considered a kind of “bevel”, and therefore the terms are often used interchangeably.
Inserts a chamfer line at each vertex of a 2D polyline where two line segments meet. The chamfer lines become new segments of the polyline unless the Trim option is about to No Trim. For more about the chamfer command.
Hey guys, what’s up? Welcome to my website engineering Technology. Today I will show you all about the Chamfer command used in AutoCAD. You listen to the Chamfer command. Chamfer also mostly uses the command in AutoCAD. So, guys, the Full article will go to discuss Chamfer Command which is the important command of Autocad.
Guys, I hope you are excited about the information about Chamfer Command. I will give you better than better knowledge about the Chamfer Command in this article. Guys, you know What is Chamfer Command and How to use this command in AutoCAD.
If you are an Autocad user, you already know about this. If you don’t know the Chamfer command don’t worry I will explain the detail of the Chamfer command in this article. Please Watching this article till the end. This article is very helpful for you. Let’s go to the point:》》
I will explain different things about the Chamfer Command. Followings are the point which is included in this article. Following quarries are discussed in this content:
1. What is Chamfer Command?
2. How to use Chamfer in AutoCAD?
What is AutoCAD Chamfer Command?
Guys if you already know about Chamfer Command that’s good. If you don’t know I will give you better knowledge about it.
Basically, Chamfer Command is one of the important commands in AutoCAD.
Which is defined as the Autocad Command allows making Chamfer of the corner formed by two lines at the same station or point. I mean it is the command used to make Chamfer at the corner to each other.
This command mostly uses Chamfer distance. If you can input 0 distance no Chamfer formed but if you can input the above value from 1 and then Chamfer is formed to joint two-point of two-line while using Chamfer command. So, guys, the key role of Chamfer’s command is to make a line.
How to use AutoCAD Chamfer Command?
First, open your Autocad software which you install on your computer.
- Open the .dwg file which you can Chamfer the object of the file.
- Click and open the file.
- Go to ribbon bar 》Modify menu bar》Chamfer icon.
- Click on the Chamfer icon.
- Also, you can input the ” CH ” Command in the command bar.
- Hit enter.
- Autocad program gives you instructions that you can follow.
- More options are available in the command bar.
- Type capital later. Like D=Distance.
- If you can type ‘D’ and press enter.
- Specify the Autocad Chamfer Distance [1cm, 1m, 1 inch, 1 foot -… as you can choose drawing unit] and press enter.
- Select the first line of one corner.
- Select the second line of the same corner.
- The chamfer formed in the AutoCAD screen.
- Press enter.
- The result shows you on the screen.
These are the detail using the process of the Chamfer in Autocad. All the work can do on your computer or laptop. Follow the following process in your AutoCAD screen simultaneously and then easy to understand. I mean understand theoretical knowledge and try with practical knowledge.
I hope you understand the above following process for using the Chamfer command. Hope you like this article please comment below in the comment section. If you have any queries and doubts please contact me on Facebook, Twitter, Instagram.
Suggest post: How to Convert DWG to PDF File?
Thanks for visiting my blog.
visit another web for a free blogger template
