Short Information of Land Management System In Nepal in 2021

by

The best information on Land Management System

Hey guys, what’s up. Hope you are alright with everything. Today I will discuss the land measurement system in Nepal. You know what island measurement system. If you know that well. If you don’t know about the land measurement don’t worry I will give you the best knowledge about it. 
 
Land measurement is the process of collection of every land data, dimension, and contour. In other words, the land distance and dimension are taken for any project and any work on the ground.
 
If you can start any type of project on the ground then before you can take all the information, measurement, and data of land with the help of measuring tape that is land measurement.
The tape is the most usable and length measuring instrument in every measuring field. Without tape, we can not measure any kind of length. It is the most necessary device in the engineering field.
There are two types of measuring tape. Such as spring tape and long tape. There are different lengths of tape is available in the market. such as 25, 50, 75, 100, 200, 300 and even 500 ft in length. The tape is designed for engineers and builders. Generally, tapes are available in two colors. Such as white and yellow.
mostly least count of tape is 1 mm

 

The tape is the distance measurement instrument which is of different types; line tap, steel tape, Invar tape, and metallic tape.
 
 
It is an important instrument for the measurement of the distance between one point to another point. It has a different length of tape. Like 20 m, 30 m, 50 m, 100 m, and 500 m, etc. Every length can be measure by using a chain and tape.
 
Length measurement system
100 millimeter= 1 centimetre
100 centimetre = 1 meter
1000 meter = 1 kilometre
 
1 meter = 3.3 feet

1 feet = 0.3 meter

 

 

Land measure by using Autocad software. 

 
Autocad is the most precise software for designing and calculation. In the AutoCAD software, we find out the area of planned land, etc. just using two methods to find the land area in AutoCAD.
 
Using the “AA” command
It is the command method to find out land area or plan area. using the aa command and select the boundary of the plan and hit enter then show the area.
 
 
Using hatching

This is the second method for fine out are in AutoCAD. In this method hatch the plan or land in AutoCAD. Then after clicking the hatch of the plan boundary and go to the property option.

Measurement System in Nepal

In Nepal, where a Bigha is about 6,772.63 square meters. Officially, most measurements of lands use units of either Bigha or Ropani. A Metric system is very seldom used officially in measuring the area of Land.

Measurement of an area in terms of Bigha

1 bigha    = 20 kattha    =   6,772.63 m²   = 72,900 sq.ft    = 13.31 ropani 
1 kattha = 20 dhur        =  338.63 m²       = 3,645 sq.ft.
1 dhur                                      =  16.93 m²         = 182.25 sq.ft

 

Measurement of an area in terms of Ropani

1 ropani   = 16 aana      =  508.72 m²       = 5476 sq. ft

1 aana      = 4 paisa       =  31.80 m²         = 342.25 sq.ft

1 paisa        = 4 daam       =  7.95 m²          = 85.56 sq.ft
1daam                                        =  1.99 m²          = 21.39 sq.ft

Other
1 ropani     = 4 matomuri
25 ropani   = 1 khetmuri
Length Measurement
1 bitta       = 18 angul
1 haat       = 2 bitta
1 danda    = 4 haat
1 janjir      = 9 haat
1 kosh      = 480 danda      = 3.218 km    = 2 mile
1 gaj         = 0.9144 m       = 1 yard

Volume Measurement

1 moori         = 20 pathi
1 pathi          = 4 curuwa           = 4.54596 ltr
1 curuwa      = 2 mana
1 mana         = 4 chauthai      = 10 muthi
1 lit              = 1.7598 mana

Weight Measurement
1 kg              = 5 pau in ktm 4 pau outside ktm
1 pau            = 19 tola         = 199 gms
1 tola            = 100 lal         = 11.66 gm
1 chatak       = 4 1/2 tola     = 58.31 gm
1 pau           = 4 chatak
1 seer          = 0.9331 kg
1 dharni        = 12 pau          = 2.3934 kg
1 maund       = 37.3242 kg
1 gm             = 8.573 lal
1 pound       = 0.4536 kg


The lands measuring system Table 

Measuring System Converter
1 Dhur 16.93 sq m
1 Haath 1.5 ft
1 Daam 21.39 sq ft
1 Daam 1.99 sq m
1 Paisa 85.56 sq ft
1 Paisa 4 Daam
1 Aana 16 Daam
1 Aana 342.25 sq ft
1 Aana 31.8 sq m
1 Aana 4 Paisa
1 Khetmuri  25 ropani
1 ropani  4 Matomuri 
1 ropani 256 Daam
1 ropani 5476 sq ft
1 ropani 508.72 sq ft
1 ropani 64 Paisa
1 ropani 16 Aana
1 Dhur 182.25 sq ft
1 Kattha 3645 sq ft
1 Kattha 338.63 sq m
1 Kattha 20 Dhur
1 Bigha 13.31 ropani 
1 Bigha 72900 sq ft
1 Bigha 6772.63 sq m
1 Bigha 20 Kattha
 
 
 

So finally guys this is the General information for the land measurement system in Nepal. I hope this article is very helpful for you. If you like and helpful please share this post with your friends. A short comment on the comment section. Thanks for visit techmeenginee.


Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.

error: Content is protected !!